A) It is designed primarily to provide network assurance.
B) It supports numerous extensibility options, including cross-domain adapters and third-party SDKs.
C) It supports high availability for management functions when operating in cluster mode.
D) It enables easy autodiscovery of network elements in a brownfield deployment.
Correct Answer
verified
Multiple Choice
A) The router will forward the packet via either Serial0 or Serial1.
B) The router will return the packet to its source.
C) The router will forward the packet via Serial2.
D) The router will drop the packet.
Correct Answer
verified
Multiple Choice
A) RADIUS
B) TACACS+
C) EAP-Chaining
D) PEAP
E) EAP-TLS
Correct Answer
verified
Multiple Choice
A) A spine switch and a leaf switch can be added with redundant connections between them.
B) A spine switch can be added with at least 40 GB uplinks.
C) A leaf switch can be added with connections to every spine switch.
D) A leaf switch can be added with a single connection to a core spine switch.
Correct Answer
verified
Multiple Choice
A) HTTPS
B) SSH
C) HTTP
D) Telnet
E) TFTP
Correct Answer
verified
Multiple Choice
A) blocking
B) listening
C) learning
D) forwarding
Correct Answer
verified
Multiple Choice
A) UDP traffic has lower overhead than TCP traffic
B) UDP provides a built-in recovery mechanism to retransmit lost packets
C) The CTL field in the UDP packet header enables a three-way handshake to establish the connection
D) UDP maintains the connection state to provide more stable connections than TCP
E) The application can use checksums to verify the integrity of application data
Correct Answer
verified
Multiple Choice
A) Configure the ipv6 route 2023::/126 2012::1 command on the Atlanta router. Configure the ipv6 route 2023::/126 2012::1 command on the Atlanta router.
B) Configure the ipv6 route 2012::/126 2023::2 command on the Washington router. ipv6 route 2012::/126 2023::2 command on the Washington router.
C) Configure the ipv6 route 2012::/126 2023::1 command on the Washington router. ipv6 route 2012::/126 2023::1
D) Configure the ipv6 route 2023::/126 2012::2 command on the Atlanta router. ipv6 route 2023::/126 2012::2
E) Configure the ipv6 route 2012::/126 s0/0/0 command on the Atlanta router. ipv6 route 2012::/126 s0/0/0
Correct Answer
verified
Multiple Choice
A) southbound
B) overlay
C) northbound
D) underlay
Correct Answer
verified
Multiple Choice
A) string
B) array
C) Boolean
D) object
Correct Answer
verified
Multiple Choice
A) IP SLA
B) syslog
C) NetFlow
D) SNMPv3
Correct Answer
verified
Multiple Choice
A) IKE
B) GDOI
C) SAP
D) MKA
E) Diffie-Hellman
Correct Answer
verified
Multiple Choice
A) allocation nonoverlapping channels to access points that are in close physical proximity to one another
B) disabling TCP so that access points can negotiate signal levels with their attached wireless devices
C) configuring access points to provide clients with a maximum of 5 Mbps
D) setting the maximum data rate to 54 Mbps on the Cisco Wireless LAN Controller
Correct Answer
verified
Multiple Choice
A) It allows switches to read frame tags.
B) It allows ports to be assigned to VLANs automatically.
C) It maintains VLAN consistency across a switched network.
D) It allows frames from multiple VLANs to use a single interface.
E) It allows VLAN information to be automatically propagated throughout the switching environment.
Correct Answer
verified
Multiple Choice
A) explicitly assign a link-local address
B) disable the EUI-64 bit process
C) enable SLAAC on an interface
D) configure a stateful DHCPv6 server on the network
Correct Answer
verified
Multiple Choice
A) They determine the optimal within an autonomous system.
B) They determine the optimal path between autonomous systems.
C) BGP is the current standard exterior routing protocol.
D) Most modern networking supports both EGP and BGP for external routing.
E) Most modern network routers support both EGP and EIGRP for external routing.
Correct Answer
verified
Multiple Choice
A) to uniquely identify devices at Layer 2
B) to allow communication with devices on a different network
C) to differentiate a Layer 2 frame from a Layer 3 packet
D) to establish a priority system to determine which device gets to transmit first
E) to allow communication between different devices on the same network
F) to allow detection of a remote device when its physical address is unknown
Correct Answer
verified
Multiple Choice
A) They are routed the same as public IP addresses.
B) They are less costly than public IP addresses.
C) They can be assigned to devices without Internet connections.
D) They eliminate the necessity for NAT policies.
E) They eliminate duplicate IP conflicts.
Correct Answer
verified
Multiple Choice
A) ipv6 address dhcp
B) ipv6 address 2001:DB8:5:112::/64 eui-64
C) ipv6 address autoconfig
D) ipv6 address 2001:DB8:5:112::2/64 link-local
Correct Answer
verified
Multiple Choice
A) UDP is used when low latency is optimal, and TCP is used when latency is tolerable.
B) TCP is used when dropped data is more acceptable, and UDP is used when data is accepted out-of-order.
C) TCP is used when data reliability is critical, and UDP is used when missing packets are acceptable.
D) UDP is used when data is highly interactive, and TCP is used when data is time-sensitive.
Correct Answer
verified
Showing 381 - 400 of 411
Related Exams